sponsored by Pan-Pioneer Co., Ltd.
| main wire drawing machine page no.1 | main wire drawing machine page no.2 | main wire drawing machine page no.3 | main wire drawing machine page no.4 | main wire drawing machine page no.5 |
| main extrusion machine page no.1 | main extrusion machine page no.2 | main extrusion machine page no.3 | main extrusion machine page no.4 | main extrusion machine page no.5 |
¡@
A. Specification
1.] Main Specification Of Tandem line wire drawing machine:
1.1.) Type: DB-17 Horizontal dipping type tandem line wire drawing machine
1.2.) Application: For copper tandem line wire drawing and annealing
1.3.) Supply tandem line machine: mm
1.4.) Finished tandem line machine: mm
1.5.) Tandem line machine speed: Max.( Production speed)
1.6.) Number of dies: pcs
1.7.) Tandem line wire drawing machine area reduction: %
1.8.) Tandem line wire drawing machine elongation: %
1.9.) "CCCS" Central Computer Control operation system for continuous annealer
1.10.) Driven motor: HP DC for tandem
line wire drawing machine.
2.] Main Specification Of Annealing Machine:
2.1.) Type: AC single phase electric resistance type
2.2.) Tandem line machine speed: Max.
2.3.) Annealing tandem line machine diameter: mm
2.4.) Transformer: dry type
2.5.) Contacting Sheave: Preheating zone + Annealing zone
2.6.) Anti-oxygen steam boiler
2.7.) Electric control: [MMI+PLC] computer
3.] Main Specification Of Tandem line machine Pre-heater:
3.1.) Type: electric induction heating type
3.2.) Application: For copper conductor pre-heating before extrusion.
3.3.) Transformer capacity: 10KVA
3.4.) Input voltage: 200V/240V 1 Phase
3.5.) Output voltage: 0-12V
3.6.) Tandem line machine speed: Depend upon the tandem line machine size.
4.] Main Specification Of Insulation Machine:
4.1.) Type: BM mixing type extruder
4.2.) Application: Solid PVC/ HDPE insulation for telephone tandem line machine.
Foam-Skin insulation.
4.3.) Capacity:
4.3.A.) 65mm extruder: kg/Hr (soft PVC)
4.3.B.) 40mm co-extruder: kg/hr (soft PVC)
4.4.) Conductor diameter: mm
4.5.) Finishing diameter: mm
4.6.) Screw type :L/D=26, BM type, C/R: 3.0
4.7.) X-head: Fixed center type.
4.8.) Tandem line machine speed: Max.
4.9.) Control system "" system.
4.10.) Driven motor:
4.10.A.) motor for 65mm extruder x 1 set
4.10.B.) motor for 45mm extruder x 1 set
4.10.C.) motor for capstan x 1 set
4.10.D.) motor for dual spooler x 2 sets
5.] Main Specification Of Cooling Trough:
5.1.) Type: Spray type double layer cooling trough.
5.2.) Length: Moving trough 3M with 500mm moving stroke. Main multipe trough 50M.
5.3.) Material: Made of stainless steel plate.
5.4.) Air wiper: high pressure blowing type
6.] Main Specification Of Spark Tester:
6.1.) Type: High frequency ball chain type
6.2.) Model: HF-20E: for controller, HFEBD-12: for detector
6.3.) Brand: CLINTON INSTRUMENT CO,. MADE IN AMERICA
6.4.) Power source: 120V/240V AC.
6.5.) Output voltage: 0-5KV/0-15KV.
6.6.) Output frequency: 3KHz nominal
6.7.) Max. load current: 4mA resistive, 40mA capacitive
6.8.) Cable range: 0-25mm diameter.
6.9.) Tandem line machine speed: Max.
7.] Main Specification Of Capstan:
7.1.) Type: 318mm diameter. dual wheel with 5+6 grooves
7.2.) Wheel material: Casting Aluminum Alloy.
7.3.) Tandem line machine speed: MPM Max.
7.4.) A stainless steel case with a glass door is provided
7.5.) Driven motor: HP DC motor. synchronize control.
8.] Main Specification Of Take-Up Machine:
8.1.) Type: Dual spooler with auto-change device.
8.2.) Applications: Non-stop continuous spooling for telephone tandem line machine insulation tandem line machine
8.3.) Bobbin size: 500mmODx375mmAW
8.4.) Tandem line machine speed: Max.
8.5.) Tandem line machine change: Automatic change
8.6.) Bobbin change: In/out by manual type
8.7.) Driven Motor: 15HP DC motor 2 sets
B. Tandem line wire drawing machine Composition:
1.] DB-17 Tandem line wire drawing Machine......................... 1set
2.] 75KVA Annealing Machine..................................................... 1set
3.] Dancer Synchronize Unit............................................................ 1set
4.] Pointing machine....................................................................... 1set
5.] 10KVA Tandem line machine Pre-heater.............................. 1set
6.] Auto Loader & Hoper Dryer........................................................ 1set
7.] 65mm Insulation Extruder........................................................... 1set
8.] 45mm co-extruder .......................................................................1set
9.] Fixed Center X-Head...................................................................1set
10.] Laser Diameter meter gauge....................................................1set
11.] Control & Operation Panel....................................................... 1set
12.] 3M Movable Cooling Trough.................................................... 1set
13.] 50M Multiple Cooling Trough................................................... 1set
14.] Dual Wheel Capstan................................................................. 1set
15.] 2nd Vertical Accumulator......................................................... 1set
16.] Dual Spooler Take Up.............................................................. 1set
17.] Driven Motors............................................................................ 1set
18.] C-Monitor with control unit........................................................ 1set
Spare Parts
19.] DB-17 Tandem line wire drawing Machine:
19.1.) Fuse for DC motor............................................................................................ 2pcs
19.2.) Carbon brush for DC motor............................................................................ 2pcs
19.3.) Sensor for auto counter..................................................................................... 1pc
19.4.) V belt for annealer.............................................................................................. 1pc
20.] Annealing Machine:
20.1.) Carbon brush ................................................................................................... 3pcs
20.2.) seal.................................................................................................................... 2pcs
20.3.) Copper bus bar................................................................................................... 5M
20.4.) Contacting ring............................................................................................... 10pcs
21.] Insulation Extruder:
21.1.) H.H. for DC motor............................................................................................ 2pcs
21.2.) Carbon brush for DC motor............................................................................ 2pcs
21.3.) Heater for cylinder............................................................................................ 6pcs
21.4.) Heater for X-head............................................................................................ 2pcs
21.5.) Thermocouple.................................................................................................. 3pcs
22.] Dual Spooler Take Up:
22.1.) H.H. for DC motor............................................................................................ 2pcs
22.2.) Carbon brush for DC motor............................................................................ 2pcs
22.3.) Sensor for length counter.................................................................................. 1pc
22.4.) Belt for take-up................................................................................................. 2pcs