MS-DA-00A

1.] Model of machine:

 2.] Feature:

2.1.) Type: Horizontal wet slip type........................................ 1 set 
2.2.) Die holder: Double dies holder, one for wire guide die and other for drawing die 
2.3.) Supply wire :13mm/OD.........1 set 
2.4.) Finishing wire:ψ5mm.min ............................................. 1 set 
2.5.) Mechanical elongation:35%(Buyer’s option).................. 1 set 
2.6.) Mechanical area reduction:24.5%(Buyer’s option) ........ 1 set 
2.7.) Line speed:180mpm Max .............................................. 1 set 
2.8.) Take up: bobbin

2.8.1.) Type:800mm/OD single spooler 
2.8.2.) Tension control: By current setting tension control module

2.9.) Driven motors: 
2.9.1.) For aluminum wire drawing machine :250HP DC motor 
2.9.2.) For take-up spooler:20HP AC motor

2.10.) DC Drive & AC Inverter for wire drawing machine 

    2.10.1.) DC Driver: ABB , Germany 
2.10.2.) AC Inverter: ABB , Germany

2.11.) Length Counter: 
2.11.1.) Type: Proximate sensor type 
2.11.2.) Pick up from finishing capstan 
2.11.3.) Unit Length: 1M/ count

 3.] Machine Composition:

3.1.) 14mm Rod break down machine main body ................... 1 set 
［560mm Capstan with drawing die 3 sets+650mm capstan with drawing die 1 set］ 
3.2.) Water cooling with rotary joint for finishing capstan 
3.3.) Lubricant circulation device for gear box ....................... 1 set 
3.4.) 800mm single bobbin spooler........................................ 1 set

 4.] Excluding items:

4.1.) 14mm rod Pay-off stand 4.2.) Dancer for spooler 4.3.) Pointing & string machine 4.4.) Drawing solution circulating device 4.5.) Foundation, piping & wiring

 5.] Other detail specification will be offered in necessary